Price:
$28125
Product ID:
ALTSIM-ACVTX-181818
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Additional Vacuum Chamber, Pump, or Controller Images

Check out some of our portable vacuum chamber and pump systems. All our vacuum chambers, vacuum controller, vacuum systems, or anything else that we make can be customized to your requirements and specifications. Contact us if to learn how we can build you a fantastic vacuum system.

Product Specifications

Ultimate Vacuum:
0.025 Torr (25 micron)
Maximum Altitude:
45 Miles
Chamber Material:
Fully Transparent Acrylic
Lid:
Fully Transparent Acrylic
User Interface:
7 inch HMI Touch Panel
Voltage:
115V

Features

Simulate 45 Miles Altitude
Fully Setup Turn-Key System
Portable 4 Lockable Swivel Casters
Hinged and Gas Spring Supported Top Lid
Fully Transparent Lid
Fully Transparent Chamber
7 inch HMI Touch Panel
Customizable Altitude Recipes
1 Year Safe Buyback Warranty

Description

Altitude Simulation System, made by Sanatron, fully setup and ready to go. This Altitude simulation system will allow you to simulate altitudes inside the vacuum chamber up to 45 miles / milliTorr (25 micron). A full Turn-Key System included are a A Gas Spring Supported, Hinged, Top Loading Lid Crystalline Clear Acrylic Vacuum Chamber, cube 12 inch inside dimensions, a 7 CFM rotary vane vacuum pump, an altitude simulation controller, all sitting on a table frame that includes four lockable swivel casters.

This system will enable you to simulate any altitude up to 45 miles. (NOTE: If you need higher altitudes, we can make that happen, contact us) The mode of operation is that you close the vacuum chamber lid, clamp it, set your attitude, press start and watch the vacuum pump ramp up the vacuum inside the chamber. Once the set altitude has been reached, the vacuum valve will close, and the chamber will hold this altitude for as long as needed. You also have the ability to program your recipe and set and hold several altitudes.

Many of our altitude simulation systems are customized to our clients specifications and requirements. Therefore, if you need a vacuum feedthrough, or if you need to run thermocouples into the chamber, please contact us and we can make that happen. Furthermore, anything on this system can be customized so be sure to let us know how we can help you build your system.

WAIT! Take a look at similar Items you may like…

We make Robustly Designed and Quality Engineered Systems. What are you building? Take a look at the links below and discover some of the cool things we make.

Helium Leak Testing Systems
Helium Leak Testing Systems are instruments which detect leaks in specimen by detecting present of helium. Helium is used as a tracer gas to detect and quantify a leak. For example, a test specimen is filled with helium and placed into a test chamber, a vacuum is pulled and a helium mass spectrometer is connected to the test chamber. If helium is detected, it is due to the fact that it has escaped from the specimen through a leak path. Helium Leak Testing is a qualitative and quantitative method of detecting product leaks.
Rotary Vane Vacuum Pumps
Rotary Vane Vacuum Pumps are the most widely used vacuum pump in the industry. When it comes to performance at a reasonable price, rotary vane vacuum pumps are the way to go. Many Rotary Vane Pumps can achieve 2 to 5 milliTorr vacuum rating at a good volumetric flowrate (2 to 20 CFM) at a very reasonable price (hundreds to a few thousand dollars)
Our Work: Submersion Leak Testing of Explosive or Volatile Products
Ever wondered how to leak test packaged volatile products? Do you know that there are countless unstable products out there that have to be leak tested as part of quality control? By volatile we mean products which ignite, explode, shatter, melt, or are hazardous. Keep in mind that hazardous material for whatever reason has be undergo quality control as well.
Related Articles: High Altitude Package Testing utilizing an Acrylic Vac Chamber
An Acrylic Vacuum Chamber can be used to simulate elevation very reliably to altitudes up to 60.9 km or 200,000 feet. This provides several advantages over other testing methods as acrylic is transparent and enables full view of interior during testing. In this article, we will give you a through guide on what can be done to eliminate the risk of packaging damage during shipments at high altitudes.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.