Pneumatic Two Hand Anti-Tie Down Control Box
A two hand anti tie down is a device which requires the operator to actuate both push buttons within a short period of time in order to generate an output signal. If an operator ties down on button and then tries to push the other button an output signal will not be generated. It is only when both buttons are pushed that an output signal is generated.
Pneumatic only - Does not require electricity. Supply the pressure line in the input, and output pressure is generated when both buttons are pressed simultaneously.
Anti tie down - both push buttons must be actuated simultaneously in order to generate an output signal.
Anti Repeat - both buttons must be released before another cycle can be initiated.
Anti Bridging - this control box is designed so that the operator must use both hands in order to initiate an output signal.
Meets or exceed all applicable OSHA Standards of this date including 1910.217(6), 1910.217(b)(13).
Meets ANSI B11 Standards as they apply to the operation of pneumatic systems.
Length X Width X Height: 9.75in X 3.5in X 2.5in
Two 22mm push buttons
One input and one output push to connect fitting 1/4 inch OD tube
Made in USA incorporating the highest quality standards