Price:
$42825
Product ID:
CAC-SSHSH-242424
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Additional Stainless Steel Vacuum Chamber Images

Please take a look at additional product images of our Stainless Steel Vacuum Chambers with Clear Acrylic Front Door. All our chambers can be customized. Please contact us if you are looking for a custom vacuum chamber.


The Only Stainless Steel Vacuum Chamber robustly designed and quality manufactured
to consistently perform and meet your needs!

Product Specifications

Vacuum Rating
10-3 Torr (1 micron)
Vacuum Loss Rate
1 Torr (0.04 inHg) in 24 hours
Inside Dimensions (inch)
24 High X 24 Wide X 24 Deep
Product Dimensions (inch)
29 High X 29 Wide X 29 Deep
Tolerance (inch)
+/- 0.125
Chamber Material
Stainless Steel
Lid Material
Clear Cast Acrylic
Seal
Buna O-Ring
Approximate Volume
13824 cubic inch - 60 Gallon - 227 Liters

Features

Hinge Side Door, Front Loading
Door Handle
2 Clamps
Stainless Steel Chamber
Clear Acrylic Door
QTY:3 x NW25 Ports
One Year Safe Buyback Guarantee

Description

You are looking at our Stainless Steel Vacuum Chamber with Acrylic Front Door. The Lid Material is Clear Cast Acrylic which houses the O-Ring. The inside Dimensions of this chamber are 24 inch Wide, 24 inch Deep, 24 inch High. This Vacuum Chamber is rated to 1 micron absolute pressure (10-3 Torr). The door is front loading and hinged. Included with this chamber are a robust and ergonomic Lid Handle, door hinges, two ?get-out-of-the-way? toggle clamps, and three NW25 Ports.

The operational range of stainless steel vacuum chambers is -190 Degrees Celsius and +290 Degrees Celsius. In addition to a broad operational range, Stainless Steel vacuum chambers are more chemically resistant to thinners, alcohols, and acetones.

Please note that the three NW25 ports on this vacuum chamber are open and you will need to purchase a vacuum valve, a venting valve, and a vacuum gauge separately. We would recommend that you go with a NW25 Vacuum Valve, a Digital Vacuum Gauge (higher accuracy and resolution), and a 1/4 inch NPT Venting Valve. However, what valves and gauges you select will depend on your application. Keep in mind that we do offer connection hardware and vacuum pumps to go along with the vacuum chamber as a fully system.

Get your Vacuum Pump with your Vacuum Chamber!

One of the most common mistakes people make is to try to source every single part for their vacuum system themselves. The end results is either the wrong vacuum pump, the wrong connection hardware, or a sub optimal Vacuum System.

We have sourced the most appropriate vacuum pump for you so that you don’t have to. Get your vacuum chamber and vacuum pump and connection hardware for a complete vacuum system! Click here to get your Vacuum Pump and Vacuum Chamber System

Some of our Popular Items

We are an Engineering Excellence Company. Check out some of our other items we carry that you can combine/integrate with your systems or projects.

Internal Pressurization ASTM F2096 Leak Testing Systems
Internal Pressurization (ASTM F2096) Leak Testing Systems are instruments that are used during the Quality Control process to discover leaks in sealed packages. As opposed to the vacuum bubble leak test, where the specimen is subjected to a vacuum, the internal pressurization integrity test creates a pressure difference and drives the air through a leak by internally pressurizing the specimen. Our Internal Pressurization Leak Testing Systems are designed and built to conform to the ASTM F2096 Protocol Standard.
Liquid and Gas Vacuum Feedthroughs
A Liquid and Gas Vacuum Feedthroughs are tubes that will allow you to run liquid or gas into your vacuum chamber without contaminating the vacuum levels or vacuum chamber in general. Say you are looking to run a coolant into the vacuum chamber and cool a component you are testing. You can simply install a liquid and gas vacuum feedthrough are run your coolant towards your test specimen.
Our Work: Vacuum Storage of Pharmaceutical Products and Medical Supplies
A pharmaceutical manufacturer contacted us to build them a large vacuum storage system for their pharmaceutical products. They were looking for as much footprint as possible which is why they got a two-chamber system from us. They needed a total of 6 shelves per chamber including trays. Finally, they were looking to have both chambers to be placed on a table frame assembly with lockable swivel casters. What you are seeing is a two chamber system, each chamber is our 20 inch cube acrylic vacuum chamber, front load hinged door. Each chamber can be accesses independently while the other is under vacuum. The trays can be easily loaded and unloaded. This whole system can also be moved to anywhere in their facility.
Related Articles: Dry and Wet Vacuum Leak Quality Testing of Sachets Filled with Powder or Liquid
This article will talk about how to test the seal integrity of food bars. You will understand what you will need to do in order to ensure good seal quality. This article covers the seal integrity testing of Breakfast bars, Chocolate candy bars, Crisped rice bars, Energy bars, Granola bars, Health bars, Protein bars, Fruit and Nut Bars, Meal Replacement Bars or any other food bar sealed with a flow wrapper.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.