Price:
$26360
Product ID:
LEAK-FCD-161605
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Product Specifications

Instrument Type:
Leak Testing Instrument
Test Type:
Force Decay
Test Sensitivity:
10-3 sccm
Locate Leak:
NO
Quantify Leak:
YES
Number of Test Channels:
1
User Interface:
4 inch HMI
Max Vacuum:
0.001Torr (1micron)
Voltage:
115V

Features

World Simplest Force Decay Leak Tester
Test Two (2) Samples at ONCE
Customizable Leak Test Profile
Detect Leaks through drop in pressure
Objective Test
Fully Qualified and Validated
Calibration Available Upon Request
1 Year Safe Buyback Warranty

Description

Sanatron Force Decay Leak Testing System is an instrument that will enable you to detect and quantify a leak via the force decay method. This instrument is a single channel instrument that enables you to test one specimen at a time. A force decay is a qualitative and a quantitative leak detection method.

The way a force decay test works is by inflating the specimen. This inflation is done by internally pressurizing the specimen through a pressurized air line or placing the specimen inside a vacuum chamber, pulling a vacuum, and generating a pressure differential. The pressurized specimen will swell up and apply force to the transducer. This transducer will measure the force applied and monitor the change in force over time. If there is not change in force, this means that there are no leaks since the pressure inside the specimen stayed constant. On the other hand, if the force applied by the sample decreased over a specified amount of time, you have a leak, this is because the air escaped through a leak path and hence decreased the pressure inside the sample which in turn decreased the force applied to a sample.

Please note that this instrument is not intended to be purchased as a standalone item but rather as a part of a whole leak testing assembly. Feel free to contact us to find out how you can implement a leak testing instrument into your quality control program.

Did you know that we carry a many more products?

We are an Engineering Excellence Company. There is a tremendous amount of valuable resources and information regarding vacuum systems and vacuum technology; check them out by clicking on the links below.

Vacuum Degassing Systems
Vacuum Degassing Systems enable you to remove trapped gas inside your liquids - generally, epoxies. Degassing is a vital part of any two part or more mixing process, this includes but is not limited to epoxy, pharmaceutical mixing, potting, recipe creation. A vacuum degassing system consists of a vacuum pump, connection hardware (includes filters and traps) and a vacuum chamber.
Roots Blower Vacuum Pumps
Roots Blower Vacuum Pumps are used when a large amount of Volumetric Airflow is Required. Root Vacuum Pumps cannot operate independently and must be used in conjunction with another roughing pump such as Rotary Vane Pump or Piston Pump. The advantages of a Roots Vacuum Pump is that the Pumping Speed can be increased by a factor of 5 up to a factor of 10; meaning that a 20 CFM Rotary Vane Vacuum Pump can now be boosted to pump 120 CFM!
Our Work: Electronic Component Testing of Satellites at High Altitudes
Electronic Components of Satellites behave differently in outer space as compared to how these behave at sea level. How do you know that your satellite will survive outer space? How do you confirm that your circuit boards will function properly at higher altitudes? There is only one way to find out, and that is to test and validate your design.
Related Articles: Bubble Leak Testing using an Acrylic Vacuum Chamber
Bubble Leak Testing or Bubble Emission Testing is a procedure where leaks are visually detected and located through the emission of bubbles while the test specimen is submerged in water. In this article, we will talk about using an acrylic vacuum box as a leak detection device. We are also going to talk about the advantage, disadvantage, and the bubble leak emission test procedures.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.