Price:
$
Contact us for Pricing
Product ID:
WELCH-2700
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Product Specifications

Features

Description

Welch Mini Vacuum Blower Model 2700 offers high volumetric flow rate of 100 CFM at a very small compact size. This blower can run in two modes: (1) this blower can be backed by either an oil free vacuum pump or by an oil sealed vacuum pump ? using this setup will increase the volumetric flowrate of the pumping system by a factor of 5 of the highest flowing pump while increasing the vacuum capabilities of the best pump ? this means that you will get the best of both worlds. Or (2) the mini vacuum blower can be operated as a stand-alone (contrary to popular consensus) and generate a vacuum of 350 Torr which is about half atmosphere.

This blower can also be used to pump solvents and corrosive vapors due to the fact that it has protective coatings on its internal parts. Most blowers are connected to the inlet of a vacuum pump whether that be a rotary vane or an oil-free vacuum pump.

It is not recommended to use this blower as a stand alone pump as other options are recommended. The best way to use the blower is to use it as a part of a pumping system to geometrically and symbiotically increase the vacuum system pump performance and service life.

Similar Items

We make Robustly Designed and Quality Engineered Systems. Check out some of our other items we carry that you can combine/integrate with your systems or projects.

Vacuum Bubble Emission ASTM 3078 Leak Testing Systems
Bubble Emission (ASTM 3078) Leak Testing Systems are instruments that are used during the Quality Control process discover and locate leaks or seal integrity failures. Leaks are detected by submerging the specimen into a tank of water, applying a vacuum, and inspecting the submersed specimen for bubble emission. Our Bubble Leak Testing Systems are designed and built to conform to the ASTM D3078 protocol standard.
USB Vacuum Feedthroughs
USB Vacuum Feedthroughs are 2.0 USB ports which enable you to run a USB signal into the vacuum chamber during vacuum and pump-down operations. You have several options on what type and size of USB ports you are looking to add to a vacuum chamber.
Our Work: Altitude Testing in a Vacuum Chamber
It is not a secret that you can simulate a certain altitude in a vacuum chamber. The good thing about Acrylic Vacuum Chambers is not only that you can simulate an altitude of up to 250,000 feet, you can also fully view your test specimen during your testing operation.
Related Articles: Visual Inspection Quality Testing of Heat Sealed Packages
Visual inspection is an attractive option because it does not require the purchase of any additional equipment. There are several arguments against Visual Inspection of heat seals; the argument against visual inspection is that visual inspection is subjective, unreliable, operator dependent, or not a valid method of inspection. However, if you have the correct training, procedures, and documentation in place, visual inspection can become a powerful tool in your quest for better packaging.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.