Price:
$5538
Product ID:
WELCH-3082-01
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Product Specifications

Free Air Displacement:
5.6 CFM
Ultimate Vacuum (absolute):
0.0005 Torr (5*10-4 Torr)
Pump Type:
Rotary Vane
Pump Category:
Direct Drive
Pump Duty Type:
Heavy Duty
Motor Power:
0.5 HP
Intake Port:
NW 16
Exhaust Port:
NW 16
Oil Capacity:
1000 mL

Features

High Quality
High Performance
Fastening Holes
Gas Ballast
Force Oil Lubrication
Anti-Suckback Valve
Thermal Overload Protection

Description

The brand new Welch CRV Pro 8 Model 3082-01 direct drive Rotary Vane Vacuum Pump. One advantage of the CRV Pro Vacuum pump is that has an much more increased reliability and longer service life vs other high performance, heavy duty vacuum pumps. The reason this rotary vane vacuum pump can achieve much higher robustness and reliability is because of three main point. First, this vacuum pump will run 10 Degrees Celsius cooler than other comparable pumps which means that the corrosion and wear and tear is slowed down. Second, this vacuum pump has 40% larger oil capacity than comparable vacuum pump, this larger oil capacity will further dilute any corrosive constituents inside the vacuum pump. Third, this vacuum pump has a chemical resistant coating in the oil case and pump module which means that all non-moving parts are protected from corrosion. Furthermore, the CRV Pro Rotary Vane Vacuum Pump consumes up to 36% less oil than other comparable vacuum pumps ? this decreases the service and maintenance requirements of this vacuum pump.

The CRVPro Vacuum Pump includes all feature you need from a direct drive rotary vane vacuum pump such as Quick Flange Intake and Exhaust, Fastening Holes, Gas Ballast, Force Oil Lubrication, Anti-Suckback valve, and thermal overload protection

Common Applications include but are not limited to: degassing, vacuum ovens, vacuum concentrations, vacuum leak testing, altitude simulation, freeze drying, electronic equipment testing, and other vacuum applications. Please note that Direct drive pumps are not recommended for filtration, aspiration, drying electrophoresis gels, or other applications requiring sustained operation above 30 torr. Contact us to discuss your vacuum applications.

Did you know that we carry a many more products?

We are an Engineering Excellence Company. What are you building? Take a look at the links below and discover some of the cool things we make.

Helium Leak Testing Systems
Helium Leak Testing Systems are instruments which detect leaks in specimen by detecting present of helium. Helium is used as a tracer gas to detect and quantify a leak. For example, a test specimen is filled with helium and placed into a test chamber, a vacuum is pulled and a helium mass spectrometer is connected to the test chamber. If helium is detected, it is due to the fact that it has escaped from the specimen through a leak path. Helium Leak Testing is a qualitative and quantitative method of detecting product leaks.
Belt Drive Rotary Vane Vacuum Pumps
A Belt Drive Rotary Vane Pump is almost identical to a Direct Drive Rotary Vane Pump. The only difference between the two is that the belt drive Rotary Vane Vacuum Pump is driven by a belt. There are several advantages why a belt drive vacuum pump would be preferable. One of these reasons is that the belt drive Rotary Vane Vacuum Pump runs at a slower RPM therefore the temperature created is lower, the wear and tear is less, and the overall lifetime of the pump is longer. The disadvantages are a lower CFM and performance.
Our Work: High Altitude Vacuum Testing of Electrical Connectors and Components
This was an interesting project where one of our customers needed to test wires up to 44 inches long within a high altitude simulation environment. In addition to testing wires, several other electric connectors required altitude testing as well. The altitude requirements were 100,000 feet (30.510 km) which corresponds to 8.36 Torr - a piece of cake when it comes to the vacuum requirements of our chambers.
Related Articles: Force Decay Leak Testing
Force Decay Leak Testing is a very popular quantitative leak testing method used to quality test package and product integrity due to its ability to detect small leaks which cannot be seen through visual inspection. In this method, the test specimen is internally inflated by either internal pressurization or vacuum force. The inflated test specimen will, in turn, apply a force on a pressure transducer. Finally, the change in force applied by the inflated specimen over a specified time is observed.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.