Price:
$29250
Product ID:
LEAK-VDX-202
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Product Specifications

Instrument Type:
Leak Testing Instrument
Test Type:
Vacuum Decay
Test Sensitivity:
10-4 sccm
Locate Leak:
NO
Quantify Leak:
YES
Number of Test Channels:
2
User Interface:
4 inch HMI
Max Vacuum:
0.001Torr (1micron)
Voltage:
115V

Features

World Simplest Vacuum Decay Leak Tester
Test Two (2) Samples at ONCE
Customizable Leak Test Profile
Detect Leaks through drop in pressure
Objective Test
Fully Qualified and Validated
Calibration Available Upon Request
1 Year Safe Buyback Warranty

Description

Sanatron Vacuum Decay Leak Testing System. Designed specifically to enable you to perform vacuum decay leak tests on your specimen. This is a two channel instrument, you can test 2 specimen during each test run. This Vacuum Decay Leak Testing Instrument can go as low as 1 milliTorr (1 micron) and has the resolution of 0.1% or 3 significant figures. For Example, if you are at 100 Torr, this tester will output in 1 Torr. On the other hand, if you are at 0.1 Torr, or 100 micron, your test will have a resolution of 1 micron, or three significant figures. This instrument will enable you to monitor the change in vacuum over a specified period of time.

This Vacuum Decay Leak Testing System Instrument needs to be connected to a vacuum chamber or a specimen. Furthermore, you will need a vacuum pump in order to draw your vacuum. There are a few more things that you will need in order to start testing, this is not an instrument that is meant to be bought as a stand-alone item.

Please contact us to find out how you can start vacuum decay leak testing your items.

Did you know that we carry a many more products?

We make Robustly Designed and Quality Engineered Systems. Check out some of our other items we carry that you can combine/integrate with your systems or projects.

Force Decay Leak Testing Systems
Force Decay Leak Testing Systems are instruments that detect and quantify leaks in a test specimen through measuring the drop in force an inflated specimen applied onto a pressure transducer. The specimen is placed into a vacuum chamber, a vacuum is pulled, and the test sample inflates. As the test sample inflates, it applied a specific force onto the force transducer. This force is measured and recorded over time. If a leak exists, the specimen will deflate and lose pressure, as a result, the force it applies onto the force transducer will decrease. This in turn will enable for detection and quantification of a leak in the specimen.
Belt Drive Rotary Vane Vacuum Pumps
A Belt Drive Rotary Vane Pump is almost identical to a Direct Drive Rotary Vane Pump. The only difference between the two is that the belt drive Rotary Vane Vacuum Pump is driven by a belt. There are several advantages why a belt drive vacuum pump would be preferable. One of these reasons is that the belt drive Rotary Vane Vacuum Pump runs at a slower RPM therefore the temperature created is lower, the wear and tear is less, and the overall lifetime of the pump is longer. The disadvantages are a lower CFM and performance.
Our Work: Leak Quality Testing and Quality Control of Packets
Quality Control during Production runs is a very important procedure you must perform on your manufactured products. This is especially critical is you are an FDA manufacturer where regulatory compliance is important and necessary. Our Vacuum Chambers are specifically built to assist you meet your Quality Control and Regulatory compliance needs.
Related Articles: Force Decay Leak Testing
Force Decay Leak Testing is a very popular quantitative leak testing method used to quality test package and product integrity due to its ability to detect small leaks which cannot be seen through visual inspection. In this method, the test specimen is internally inflated by either internal pressurization or vacuum force. The inflated test specimen will, in turn, apply a force on a pressure transducer. Finally, the change in force applied by the inflated specimen over a specified time is observed.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.