Clear Acrylic Desiccator Cabinets

products >> desiccator-cabinets >> clear-acrylic-desiccator-cabinets

We are happy to offer you the most elegantly designed, engineered, and built clear acrylic desiccator boxes you can get! Our desiccators are truly air tight boxes that will prevent any moisture from seeping in. Each door has a soft Buna-N O-Ring that is compressed with two door hinges and four clamps along the perimeter of the door. In addition, our desiccator comes with a perforated middle shelf that is placed approximately along the center of the chamber dividing it into roughly two equal halves. Each door comes with a hygrometer attached to it displaying the temperature and relative humidity. Each desiccator box also comes with two 1/4 inch NPT fittings enabling you to connect a dry nitrogen gas line.

Our desiccators do come in multiple boxes either stacked on top or side to side. You can order a whole desiccator cabinet if you so choose. We do offer relative humidity control unit that can be installed with any of our desiccators. This relative humidity controller will monitor the humidity inside the desiccator, if the humidity crosses your setpoint (whether that be high or low humidity) the controller will open the valve and let gas into the desiccator bringing the relative humidity back to your setpoint.

Please note that acrylic is hygroscopic and will let moisture permeate through its walls. This means that you will have to have either a solid desiccant, or a dry nitrogen line connected to this box if you are looking to keep the relative humidity at a certain level. Feel free to contact us if you have any further question about our desiccators, we will be happy to hear from you.