Quality Control of Seals and Seams of Canned Food or Food Containers

Quality Control of Seals and Seams of Canned Food or Food Containers
Click on Image to Enlarge

Food cans which are hermetically sealed or seamed are the most consumed type of food in the United States. Fully 60% of all food consumed in a given day in the US is either canned food or food from containers. Food can seal failure can expose the consumer to an unnecessary amount of risk. Given that risk and the number of consumers present at any given day, it is very important to produce high quality seals and to test for seal integrity.

Helium Sniffer Test

There are several ways to test food cans for leaks, one of them is to perform a helium leak test by puncturing the can and injecting it with helium. If a leak is present helium will escape out of the can and will be detectable with a helium sniffer.

Helium Leak Test

A helium leak test is performed by flooding the food can with helium and by inducing a pressure differential, in most cases it is done inside a vacuum chamber, in order to force the helium through the orifice or leak path. A helium leak detector will detect presence of helium and therefore fail the part. This is a nice test as it can help quantify the size of the leak. More helium present inside the leak detector, means a greater leak.

Pressure Decay Test

This is done by applying pressure to the food can through a pressure probe. Once a set amount of pressure is reached, the pressure valve is closed and the pressure transducer begins recording the pressure drop over a time period. If a leak is present, the change in pressure will be greater than a non-leaking part. In that case, the can is rejected. Just with a Helium Leak Test, the leak size can be quantified based on the rate of change of pressure.

Vacuum Chamber

You can also use a vacuum chamber to quality test your food cans. The strength of a seam is inversely proportional to seam failures. You can therefore test for seam strength by subjecting the can to vacuum. If the seam is damaged, you can a weak seal and a leak failure. Conversely, a puncture will also be detectable by the fact that placing the food can into a vacuum chamber will create a pressure difference. The high pressure contents will press through the puncture and at that point can be visually inspected for.

So, there you have it, you can perform a helium sniffer test, a helium leak test, a pressure decay test, or a vacuum leak test to inspect for leaking food cans.

Some of our Popular Items

We make Robustly Designed and Quality Engineered Systems. Check out some of our other items we carry that you can combine/integrate with your systems or projects.

Vacuum Oven Systems
Vacuum Ovens are vacuum chambers and ovens combined in one system. Vacuum ovens are necessary during processes which require the specimen to be subjected to a hypobaric and hyperthermal environment. Our Vacuum Oven Systems enable to you run a complete vacuum vs time and temperature vs time profile. We also carry portable vacuum oven systems and custom vacuum oven systems.
Rotary Vane Vacuum Pumps
Rotary Vane Vacuum Pumps are the most widely used vacuum pump in the industry. When it comes to performance at a reasonable price, rotary vane vacuum pumps are the way to go. Many Rotary Vane Pumps can achieve 2 to 5 milliTorr vacuum rating at a good volumetric flowrate (2 to 20 CFM) at a very reasonable price (hundreds to a few thousand dollars)
Our Work: Pressure and Vacuum Chamber used for Calibration of Weather Stations across the US
Have you ever wondered how the weather forecast works? You must admit; the weathermen (or weatherwoman) have become a whole lot more accurate over time. 10 years ago, the weather forecast was not as accurate as it is today. Part of the reason is that we have better forecasting technology as in more powerful computers who crunch numbers faster to out a most likely scenario. Another reason is that mathematics, physics, and science has progressed. The main reason however, is that we have better tools and equipment.
Related Articles: Vacuum Levels of Acrylic Vacuum Chambers
In this article we will discuss the vacuum levels of an acrylic vacuum chamber. This article also covers the leak rate or the leak tightness of the acrylic chamber. Additionally, we are going to recommend a rule of thumb used for vacuum pump selection based on the size of the vacuum chamber.