Force Decay Leak Testing Instrument, 1 Channel

Price:
$4995
Product ID:
LEAK-FCD-XLC
Lead Time:
Contact Us to inquire about lead times
Return Policy:
150 days for a full refund
The Only Acrylic Vacuum Chamber robustly designed and quality manufactured to consistently perform and meet your needs!

Supporting Resources

Product Specifications

Instrument Type:
Leak Testing Instrument
Test Type:
Force Decay
Test Sensitivity:
10-3 sccm
Locate Leak:
NO
Quantify Leak:
YES
Number of Test Channels:
1
User Interface:
4 inch HMI
Max Vacuum:
0.001Torr (1micron)
Voltage:
115V

Features

World Simplest Force Decay Leak Tester
Test Two (2) Samples at ONCE
Customizable Leak Test Profile
Detect Leaks through drop in pressure
Objective Test
Fully Qualified and Validated
Calibration Available Upon Request
One Year Safe Buyback Guarantee
5-YEAR Warranty on Products, Parts, and Labor to original end user. We stand 100% behind our work!

Description

Sanatron Force Decay Leak Testing System is an instrument that will enable you to detect and quantify a leak via the force decay method. This instrument is a single channel instrument that enables you to test one specimen at a time. A force decay is a qualitative and a quantitative leak detection method.

The way a force decay test works is by inflating the specimen. This inflation is done by internally pressurizing the specimen through a pressurized air line or placing the specimen inside a vacuum chamber, pulling a vacuum, and generating a pressure differential. The pressurized specimen will swell up and apply force to the transducer. This transducer will measure the force applied and monitor the change in force over time. If there is not change in force, this means that there are no leaks since the pressure inside the specimen stayed constant. On the other hand, if the force applied by the sample decreased over a specified amount of time, you have a leak, this is because the air escaped through a leak path and hence decreased the pressure inside the sample which in turn decreased the force applied to a sample.

Please note that this instrument is not intended to be purchased as a standalone item but rather as a part of a whole leak testing assembly. Feel free to contact us to find out how you can implement a leak testing instrument into your quality control program.

Some of our Popular Items

We make Robustly Designed and Quality Engineered Systems. There is a tremendous amount of valuable resources and information regarding vacuum systems and vacuum technology; check them out by clicking on the links below.

Vacuum Bubble Emission ASTM 3078 Leak Testing Systems
Bubble Emission (ASTM 3078) Leak Testing Systems are instruments that are used during the Quality Control process discover and locate leaks or seal integrity failures. Leaks are detected by submerging the specimen into a tank of water, applying a vacuum, and inspecting the submersed specimen for bubble emission. Our Bubble Leak Testing Systems are designed and built to conform to the ASTM D3078 protocol standard.
USB Vacuum Feedthroughs
USB Vacuum Feedthroughs are 2.0 USB ports which enable you to run a USB signal into the vacuum chamber during vacuum and pump-down operations. You have several options on what type and size of USB ports you are looking to add to a vacuum chamber.
Our Work: Bubble Leak Testing System with a Dry off Sink used for Leak Testing Large Bags
How do you leak test Large Food Bags? This is the same question a Large Food and Beverage Processor had asked themselves because they had need for a bubble leak testing system which could be used to detect presence of leaks in their large bags. Their requirements were to test several sized bags with the largest bag being 24 inches Wide by 12 inch Deep by 9 inches High. In addition to the bubble leak testing system, they also needed a way to dry the bags after the test.
Related Articles: Clear Acrylic Vac Chamber Review
In this article we take a closer look into acrylic vacuum chambers, what they are used for, the advantages of using a clear acrylic vac chamber, what to look for, and where to purchase one.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.