Price:
$24750
Product ID:
LEAK-VDX-101
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Product Specifications

Instrument Type:
Leak Testing Instrument
Test Type:
Vacuum Decay
Test Sensitivity:
10-4 sccm
Locate Leak:
NO
Quantify Leak:
YES
Number of Test Channels:
1
User Interface:
4 inch HMI
Max Vacuum:
0.001Torr (1micron)
Voltage:
115V

Features

World Simplest Vacuum Decay Leak Tester
Single Channel Vacuum Decay Leak Testing
Customizable Leak Test Profile
Detect Leaks through drop in pressure
Objective Test
Fully Qualified and Validated
Calibration Available Upon Request
1 Year Safe Buyback Warranty

Description

Sanatron Vacuum Decay Leak Testing System. Designed specifically to enable you to perform vacuum decay leak tests on your specimen. You can test 1 specimen during each test run. This Vacuum Decay Leak Testing Instrument can go as low as 1 milliTorr (1 micron) and has the resolution of 0.1% or 3 significant figures. For Example, if you are at 100 Torr, this tester will output in 1 Torr. On the other hand, if you are at 0.1 Torr, or 100 micron, your test will have a resolution of 1 micron, or three significant figures. This instrument will enable you to monitor the change in vacuum over a specified period of time.

This Vacuum Decay Leak Testing System Instrument needs to be connected to a vacuum chamber or a specimen. Furthermore, you will need a vacuum pump in order to draw your vacuum. There are a few more things that you will need in order to start testing, this is not an instrument that is meant to be bought as a stand-alone item.

Please contact us to find out how you can start vacuum decay leak testing your items.

Some of our Popular Items

Our clients prefer to work with us because we are Experts in Custom Fabrication (especially Polymer Fabrication). Check out some of our other items we carry that you can combine/integrate with your systems or projects.

Vacuum Bubble Emission ASTM 3078 Leak Testing Systems
Bubble Emission (ASTM 3078) Leak Testing Systems are instruments that are used during the Quality Control process discover and locate leaks or seal integrity failures. Leaks are detected by submerging the specimen into a tank of water, applying a vacuum, and inspecting the submersed specimen for bubble emission. Our Bubble Leak Testing Systems are designed and built to conform to the ASTM D3078 protocol standard.
Micro-D Vacuum Feedthroughs
Micro D Vacuum Feedthroughs are Micro D connectors rated for vacuum and are generally installed on the vacuum chamber wall. You can then connect from the outside to the inside of your chamber.
Our Work: High Altitude Vacuum Testing of Electrical Connectors and Components
This was an interesting project where one of our customers needed to test wires up to 44 inches long within a high altitude simulation environment. In addition to testing wires, several other electric connectors required altitude testing as well. The altitude requirements were 100,000 feet (30.510 km) which corresponds to 8.36 Torr - a piece of cake when it comes to the vacuum requirements of our chambers.
Related Articles: Visual Inspection Quality Testing of Heat Sealed Packages
Visual inspection is an attractive option because it does not require the purchase of any additional equipment. There are several arguments against Visual Inspection of heat seals; the argument against visual inspection is that visual inspection is subjective, unreliable, operator dependent, or not a valid method of inspection. However, if you have the correct training, procedures, and documentation in place, visual inspection can become a powerful tool in your quest for better packaging.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.