Pressure and Vacuum Chamber, Clear Acrylic, 16 inch Cube, Full Vacuum to 15 PSIG

Price:
$6400
Product ID:
PSI-ACVVX-161616
Lead Time:
Contact Us to inquire about lead times
Return Policy:
150 days for a full refund

Additional Vacuum Chamber Images

Please take a look of some of the work we had the pleasure of doing for our clients. All our systems can be customized to your request. Feel free to contact us to see how we can help you design and build a good custom pressure and vacuum system.

The Only Acrylic Vacuum Chamber robustly designed and quality manufactured to consistently perform and meet your needs!

Supporting Resources

Product Specifications

Vacuum Rating
0.075 Torr (75 micron)
Pressure Rating:
15 PSIG
Inside Dimensions (inch):
16 W X 16 D X 16 H
Product Dimensions (inch):
24 W X 24 D X 20 H
Tolerance (inch)
+/- 0.125
Chamber Material
Clear Cast Acrylic
Lid Material
Clear Cast Acrylic
Seal
Buna O-Ring
Approximate Volume
4096 cubic inch - 17.7 Gallon - 67.1 Liters

Features

Fully removable Lid
Pressure AND Vacuum Gauge
Vent Valve 1/4 NPT
Vacuum Valve 1/4 NPT
Two Handles
12 Thumb Screw Clamps
15 PSIG pop-open Pressure Relief Safety Valve
One Year Safe Buyback Guarantee
5-YEAR Warranty on Products, Parts, and Labor to original end user. We stand 100% behind our work!

Description

Pressure and vacuum chamber made from crystal clear acrylic capable of full vacuum (Torr Rating) and 15 psi gauge pressure. The inside dimensions of this chamber are 16 inch cube. This acrylic chamber comes with two (2) 1/4 inch NPT valves. One valve is used to supply vacuum or pressure to your chamber, the other is used for venting your chamber. You are also supplied with a dial vacuum and pressure gauge which will indicate either vacuum or pressure in dual scale in kilopascal (kPa) and PSI. Additionally, there are two handles that are placed on the fully removable lid. The lid is clamped down by thumb clamps during pressure operations.

This chamber also comes with a vacuum rated pressure relief valve that will pop open and release excess pressure if the pressure inside exceeds 15PSI so you never have to worry about inadvertently over pressurizing your chamber. There is also a 5PSIG and 10PSIG option available, please contact us to inquire more.

Fortunately, this chamber can be customized, many of our clients do so because they have specific project needs. Please reach out to us and we will be happy to have the opportunity to look at your requirements and customization needs.

We have many more resources on our website that you should check out

We make Robustly Designed and Quality Engineered Systems. You should check out some of our other items we carry; click on the links below.

Acrylic Vacuum Chambers
Acrylic Vacuum Chambers are, as the name implies, vacuum chambers made from the Acrylic Polymer. There are several advantages to acrylic vacuum chambers the three main ones being 1. Fully Transparent, 2. Cost Effective, and 3. Versatile and Highly Customizable.
Diaphragm Vacuum Pumps
Diaphragm Vacuum Pumps are utilized in environments where low noise, no oil mist emissions, low maintenance, and no product cross-contamination are required such as hospitals or labs.
Our Work: Bubble Leak Testing System with a Dry off Sink used for Leak Testing Large Bags
How do you leak test Large Food Bags? This is the same question a Large Food and Beverage Processor had asked themselves because they had need for a bubble leak testing system which could be used to detect presence of leaks in their large bags. Their requirements were to test several sized bags with the largest bag being 24 inches Wide by 12 inch Deep by 9 inches High. In addition to the bubble leak testing system, they also needed a way to dry the bags after the test.
Related Articles: Force Decay Leak Testing
Force Decay Leak Testing is a very popular quantitative leak testing method used to quality test package and product integrity due to its ability to detect small leaks which cannot be seen through visual inspection. In this method, the test specimen is internally inflated by either internal pressurization or vacuum force. The inflated test specimen will, in turn, apply a force on a pressure transducer. Finally, the change in force applied by the inflated specimen over a specified time is observed.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.