Price:
$22500
Product ID:
ALTSIM-ACHSH-242424
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Additional Vacuum Chamber, Pump, or Controller Images

Check out some of our portable vacuum chamber and pump systems. All our vacuum chambers, vacuum controller, vacuum systems, or anything else that we make can be customized to your requirements and specifications. Contact us if to learn how we can build you a fantastic vacuum system.

Product Specifications

Ultimate Vacuum:
0.025 Torr (25 micron)
Maximum Altitude:
45 Miles
Chamber Material:
Crystalline Clear Acrylic
Lid:
Crystalline Clear Acrylic
User Interface:
7 inch HMI Touch Panel
Voltage:
115V

Features

Simulate 45 Miles Altitude
Fully Setup Turn-Key System
Portable 4 Lockable Swivel Casters
Hinged Front Door
Fully Transparent Lid
Fully Transparent Chamber
7 inch HMI Touch Panel
Customizable Altitude Recipes
1 Year Safe Buyback Warranty

Description

Altitude Simulation System, made by Sanatron, fully setup and ready to go. This Altitude simulation system will allow you to simulate altitudes inside the vacuum chamber up to 45 miles / milliTorr (25 micron). A full Turn-Key System included are a Front Door Loading Crystalline Clear Acrylic Vacuum Chamber, cube 24 inch inside dimensions, a 7 CFM rotary vane vacuum pump, an altitude simulation controller, all sitting on a table frame that includes four lockable swivel casters.

This system will enable you to simulate any altitude up to 45 miles. (NOTE: If you need higher altitudes, we can make that happen, contact us) The mode of operation is that you close the vacuum chamber lid, clamp it, set your attitude, press start and watch the vacuum pump ramp up the vacuum inside the chamber. Once the set altitude has been reached, the vacuum valve will close, and the chamber will hold this altitude for as long as needed. You also have the ability to program your recipe and set and hold several altitudes.

Many of our altitude simulation systems are customized to our clients specifications and requirements. Therefore, if you need a vacuum feedthrough, or if you need to run thermocouples into the chamber, please contact us and we can make that happen. Furthermore, anything on this system can be customized so be sure to let us know how we can help you build your system.

You may be interested in some of our other items

Our clients prefer to work with us because we are Experts in Custom Fabrication (especially Polymer Fabrication). There is a tremendous amount of valuable resources and information regarding vacuum systems and vacuum technology; check them out by clicking on the links below.

Vacuum Decay Leak Testing Systems
Vacuum Decay Leak Testing Systems are Instruments that detect and quantify a leak by measuring the drop in vacuum (pressure) inside the specimen. During a vacuum decay leak test, the specimen is placed into a vacuum chamber, the vacuum is pulled to a specified setpoint, and the drop in vacuum is monitored and recorded over time. If a leak in the specimen exists, the air will travel from a higher pressure (inside the specimen) to a lower pressure (vacuum chamber). As a results of the additional air, the vacuum levels will drop whereas a leak can be detected and quantified.
USB Vacuum Feedthroughs
USB Vacuum Feedthroughs are 2.0 USB ports which enable you to run a USB signal into the vacuum chamber during vacuum and pump-down operations. You have several options on what type and size of USB ports you are looking to add to a vacuum chamber.
Our Work: Bubble Leak Testing System with a Dry off Sink used for Leak Testing Large Bags
How do you leak test Large Food Bags? This is the same question a Large Food and Beverage Processor had asked themselves because they had need for a bubble leak testing system which could be used to detect presence of leaks in their large bags. Their requirements were to test several sized bags with the largest bag being 24 inches Wide by 12 inch Deep by 9 inches High. In addition to the bubble leak testing system, they also needed a way to dry the bags after the test.
Related Articles: Customizing your Acrylic Vacuum Chamber
One of many advantages of acrylic vacuum chambers is that they are highly customizable and versatile. Team Sanatron has worked with many industries across the board and designed a broad range of turkey custom solutions within the rough-to-medium vacuum realm.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.