Force Decay Leak Testing System with Clear Acrylic Chamber, Square, 10 wide, 10 Deep, 5 High

Price:
$29663
Product ID:
LEAK-FCD-050502
Lead Time:
Contact Us to inquire about lead times
Return Policy:
150 days for a full refund
The Only Acrylic Vacuum Chamber robustly designed and quality manufactured to consistently perform and meet your needs!

Supporting Resources

Product Specifications

Instrument Type:
Leak Testing Instrument
Test Type:
Force Decay
Test Sensitivity:
10-3 sccm
Locate Leak:
NO
Quantify Leak:
YES
Number of Test Channels:
1
User Interface:
4 inch HMI
Max Vacuum:
0.001Torr (1micron)
Voltage:
115V

Features

World Simplest Force Decay Leak Tester
Test Two (2) Samples at ONCE
Customizable Leak Test Profile
Detect Leaks through drop in pressure
Objective Test
Fully Qualified and Validated
Calibration Available Upon Request
One Year Safe Buyback Guarantee
5-YEAR Warranty on Products, Parts, and Labor to original end user. We stand 100% behind our work!

Description

Sanatron Force Decay Leak Testing System is an instrument that will enable you to detect and quantify a leak via the force decay method. This instrument is a single channel instrument that enables you to test one specimen at a time. A force decay is a qualitative and a quantitative leak detection method.

The way a force decay test works is by inflating the specimen. This inflation is done by internally pressurizing the specimen through a pressurized air line or placing the specimen inside a vacuum chamber, pulling a vacuum, and generating a pressure differential. The pressurized specimen will swell up and apply force to the transducer. This transducer will measure the force applied and monitor the change in force over time. If there is not change in force, this means that there are no leaks since the pressure inside the specimen stayed constant. On the other hand, if the force applied by the sample decreased over a specified amount of time, you have a leak, this is because the air escaped through a leak path and hence decreased the pressure inside the sample which in turn decreased the force applied to a sample.

Please note that this instrument is not intended to be purchased as a standalone item but rather as a part of a whole leak testing assembly. Feel free to contact us to find out how you can implement a leak testing instrument into your quality control program.

Did you know that we carry a many more products?

We make Robustly Designed and Quality Engineered Systems. Check out some of our other items we carry that you can combine/integrate with your systems or projects.

Altitude Simulation Systems
Altitude simulation systems are devices that simulate a certain altitude equivalent by controlling the vacuum inside a vacuum chamber. Altitude is a function of absolute pressure, therefore if a certain pressure is accomplished inside a vacuum chamber, a specific altitude can be simulated from the set pressure. Altitude simulation systems can be configured to not only hold a certain pressure, a complete pressure vs time profile can be programmed to be run. Furthermore, pressure vs time recipes can be loaded and run based on test requirements.
Piston Vacuum Pumps
Piston Vacuum Pumps are devices that generate a vacuum through the workings of an internal piston. Several advantages of a piston pump include, low maintenance, no oil mist emission since it’s an oil free vacuum pump – the shortcoming are not as high of vacuum levels and volumetric flow.
Our Work: Research, Development, and Testing of Weather Balloons inside a Clear Vacuum Chamber
A wonderful company (more like one of the best companies in the world) which is currently involved with the research, development, and testing of high-altitude weather balloons, had a need for a vacuum chamber capable of achieving about 100 micro Torr (Micron) of ultimate Pressure for their testing environment. Fortunately, acrylic vacuum chambers are the perfect choice when it comes to Low, Rough, and Medium Vacuum.
Related Articles: Bubble Leak Testing using an Acrylic Vacuum Chamber
Bubble Leak Testing or Bubble Emission Testing is a procedure where leaks are visually detected and located through the emission of bubbles while the test specimen is submerged in water. In this article, we will talk about using an acrylic vacuum box as a leak detection device. We are also going to talk about the advantage, disadvantage, and the bubble leak emission test procedures.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.