Portable Vacuum Chamber and Pump System, 20 in Front Door, Acrylic Chamber, 7.1 CFM Rotary Vane Pump

Price:
$8900
Product ID:
PRT-ACHRVP-202020
Lead Time:
Contact Us to inquire about lead times
Return Policy:
150 days for a full refund

Additional Vacuum Chamber, Pump, or Controller Images

Check out some of our portable vacuum chamber and pump systems. All our vacuum chambers, vacuum controller, vacuum systems, or anything else that we make can be customized to your requirements and specifications. Contact us if to learn how we can build you a fantastic vacuum system.

Product Specifications

Chamber Material:
Clear Acrylic
Lid Material:
Clear Acrylic
Chamber Type:
Hinged Front Loading Door
Chamber Inside Dimensions (inch):
20 W, 20 D, 20 H
Vacuum Pump Type:
Oil Sealed Rotary Vane
Ultimate Pressure (Torr):
0.025
Voltage:
115V
Casters:
4 x Lockable Swivel Casters

Features

Fully Assembled and Ready To GO
Crystal Clear Acrylic Vacuum Chamber
Oil Sealed Rotary Vane Vacuum Pump
Connection Hardware
Front Loading Chamber
Optimized Vacuum System
4 x Fully Lockable Swivel Casters
Portable and Versatile
1 Year Safe Buyback Warranty

5-YEAR Warranty on Products, Parts, and Labor to original end user. We stand 100% behind our work!

Description

Our portable vacuum chamber and pump systems consist of a Robustly Designed Vacuum Chamber, a Prudently Sourced Vacuum Pump, Connection Hardware, and a Portable (cart/skid) Table Structure on Lockable Casters. A Quality Built Vacuum Chamber can be a bit tough to move around, which is why we have placed it onto a portable frame structure. This is fully assembled vacuum system, quality tested, and ready to go. The vacuum chamber is a front door loading, 10 inch acrylic vacuum chamber, the pump is a standard duty 6CFM rotary vane vacuum that includes an oil mist eliminator (filter up to 99.98% of oil mist exhaust), the connection hardware is a NW25 Vacuum Ball Valve and a 6 feet bellows hose including centering rings and wing clamps, all placed onto a portable frame structure with lockable swivel casters that allow you to freely move this assembly across your facility. On a flat surface this system is easily moved and once you get it into place, all you have to do is lock the swivel casters and it is in place.

Never again will you have to chase down several different vendors, deal with emailing and calling back and forth, in order to get your vacuum system in parts which you will have to time consumingly assemble yourself. We already did all the sourcing, assembly, and quality testing. In fact, our Portable Vacuum System is the only viable choice. Several years, dollars, and tears have been spent on sourcing, optimizing, testing, and reiterating the best Portable Vacuum System that we are happy to offer to you.

We have optimized this Portable Vacuum System for Quality, Performance and Cost. Fortunately, we can customize your vacuum chamber to any size. We can add any type of vacuum pump of your preference; just let us know. Furthermore, if you need additional customizations such as adding wires, thermocouples, or other feedthroughs, please contact us to find out how we can help.

We have many more resources on our website that you should check out

Our clients prefer to work with us because we are Experts in Custom Fabrication (especially Polymer Fabrication). There is a tremendous amount of valuable resources and information regarding vacuum systems and vacuum technology; check them out by clicking on the links below.

Vacuum Bubble Emission ASTM 3078 Leak Testing Systems
Bubble Emission (ASTM 3078) Leak Testing Systems are instruments that are used during the Quality Control process discover and locate leaks or seal integrity failures. Leaks are detected by submerging the specimen into a tank of water, applying a vacuum, and inspecting the submersed specimen for bubble emission. Our Bubble Leak Testing Systems are designed and built to conform to the ASTM D3078 protocol standard.
Altitude Simulation Controller Instruments
An Altitude simulation Controller is type of vacuum controller that simulates a certain altitude because altitude can be derived from vacuum levels. An altitude simulation controller will enable you to hold your vacuum level at a certain altitude equivalent of testing, run an altitude vs time profile, or rate of change of altitude vs. time. Further options include a vacuum pump relay that will control when the vacuum pump turns on and a vacuum valve.
Our Work: Bubble Leak Testing System with a Dry off Sink used for Leak Testing Large Bags
How do you leak test Large Food Bags? This is the same question a Large Food and Beverage Processor had asked themselves because they had need for a bubble leak testing system which could be used to detect presence of leaks in their large bags. Their requirements were to test several sized bags with the largest bag being 24 inches Wide by 12 inch Deep by 9 inches High. In addition to the bubble leak testing system, they also needed a way to dry the bags after the test.
Related Articles: Dry and Wet Vacuum Leak Quality Testing of Sachets Filled with Powder or Liquid
This article will talk about how to test the seal integrity of food bars. You will understand what you will need to do in order to ensure good seal quality. This article covers the seal integrity testing of Breakfast bars, Chocolate candy bars, Crisped rice bars, Energy bars, Granola bars, Health bars, Protein bars, Fruit and Nut Bars, Meal Replacement Bars or any other food bar sealed with a flow wrapper.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.