Wob-L Dry Vacuum Pump, 115V 60Hz 1Ph, 5 Torr at 3.5 CFM

Price:
$3855
Product ID:
WELCH-2581B-01
Lead Time:
Contact Us to inquire about lead times
Return Policy:
150 days for a full refund
The Only Acrylic Vacuum Chamber robustly designed and quality manufactured to consistently perform and meet your needs!

Supporting Resources

Product Specifications

Free Air Displacement:
3.5 CFM
Ultimate Vacuum (absolute):
5 Torr
Positive Pressure Rating:
N/A
Pump Type:
Piston
Pump Category:
Dry / Oil Free
Pump Duty Type:
Medium
Motor Power:
0.33 HP

Features

* WOB-L Techology, Compact, reciprocating design for vacuum or pressure
* Table Top Application
* Suction Cup Feet
* Oil-Less, Non-Lube, Piston and Cylinder
* Permanently lubricated bearings
* Perfect Vacuum Pump for indoor settings
* No Oil, Vapor, and Contaminat Emissions
* Maintenance Free
* Welch Vacuum Manufacturer Warranty
5-YEAR Warranty on Products, Parts, and Labor to original end user. We stand 100% behind our work!

Description

Welch, Dry, Oil Free Vacuum Pump featuring WOB-L technology. This particular model number is 2581B-01. The free air flow rate is 3.5 CFM and the ultimate vacuum rating is 5 Torr or (29.5 inHg of Vacuum). This Pump comes with a power cord and a user manual. This is a very popular vacuum pump among laboratories, educational institutions, pharma, and biotech industries due to the fact that this pump is low maintenance and and oil free (dry) which can be used in indoor and closed rooms and environments without the risk of oil contamination. It does not come with connection hardware you will need to connect this vacuum pump your vacuum system. The Intake Port Thread of this pump is a 1/4 inch FNPT. Connected to this Intake port is a barb hose fitting for the 3/16 inch ID vacuum hose. To connect this pump to you vacuum system, you have two choices:

1. You can either connect a reinforce vinyl hose with 3/16 ID to the already present Barb Fitting.

2. You can unscrew the Barb Fitting and screw on your own fitting. Sometimes going from 3/16 inch ID hose to 1/4 inch ID hose will decrease your pump-down times by a factor of about 1.5.

Similar Items

Our clients prefer to work with us because we are Experts in Custom Fabrication (especially Polymer Fabrication). You should check out some of our other items we carry; click on the links below.

Vacuum Chamber and Pump Systems
Our Vacuum Chamber and pump systems are fully setup and ready to go. What you get is a vacuum chamber, a vacuum pump, and connection hardware. We carry acrylic or metallic vacuum chambers and a whole range of vacuum pumps from Rotary Vane, Piston, or Venturi. What type of vacuum chamber and pump system you want depends on your project requirement, budget, and other specifications.
D-SUB Vacuum Feedthroughs
D-Sub Vacuum Feedthroughs are universal connectors that enable you to connect from the outside towards the inside of your vacuum chamber. We carry a large list of D-subminiature connectors for your vacuum applications such as the 9 pin, 15 pin, 25 pin, 37 pin, and 50 pin or a combination of any described.
Our Work: Pressure and Vacuum Chamber used for Calibration of Weather Stations across the US
Have you ever wondered how the weather forecast works? You must admit; the weathermen (or weatherwoman) have become a whole lot more accurate over time. 10 years ago, the weather forecast was not as accurate as it is today. Part of the reason is that we have better forecasting technology as in more powerful computers who crunch numbers faster to out a most likely scenario. Another reason is that mathematics, physics, and science has progressed. The main reason however, is that we have better tools and equipment.
Related Articles: Force Decay Leak Testing
Force Decay Leak Testing is a very popular quantitative leak testing method used to quality test package and product integrity due to its ability to detect small leaks which cannot be seen through visual inspection. In this method, the test specimen is internally inflated by either internal pressurization or vacuum force. The inflated test specimen will, in turn, apply a force on a pressure transducer. Finally, the change in force applied by the inflated specimen over a specified time is observed.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.