Price:
$9150
Product ID:
LEAK-CYLEL-1212
Lead Time:
Contact Us to inquire about lead times
Return Policy:
14 days for a full refund

Additional Vacuum Bubble Leak Tester Images

Please take a look at additional product images of our ASTM D3078 Bubble Leak Testing System. All our products can be modified and customized to your requirements. Please contact us if you are looking for a custom Bubble Leak Testing System.

Cylindrical Vacuum Chamber ASTM D3078 Bubble Leak Tester


The Only Vacuum Bubble Leak Test Chamber robustly designed and quality manufactured
to consistently perform and meet your needs!

Product Specifications

Vacuum Rating:
0.075 Torr (75 micron, dry)
Vacuum Loss Rate
5.25 Torr (0.2 inHg) in 24 hours
Chamber Inside Dimensions (inch):
12 Diameter by 12 Height
Tolerance (inch)
+/- 0.125
Chamber Material:
Clear Cast Acrylic
Lid Material:
Clear Cast Acrylic
Seal:
Buna-N O-Ring
Approximate Volume:
1357 cubic inch - 5.9 Gallons - 22.2 Liters

Features

Vacuum Gauge
Vacuum Regulator Adjustment Valve
Vent Valve 1/4 NPT
Vacuum Valve 1/4 NPT
Water Drain Valve
Package Restrainin Mesh
Vacuum Pump Protection Valve
One Year Safe Buyback Guarantee

Description

This Cylindrical Vacuum Bubble Leak Testing System for ASTM D3078 Testing Procedures is fully setup and ready to go right out of the box. The inside dimensions of the test chamber are: 12 Inch Diameter and 12 inch tall. It is powered by an Electrical Vacuum Pump which is included in this system. Also included with the bubble emission testing system are a vacuum regulator, vacuum valve, a venting valve, a vacuum gauge, a water supply valve, and a water drain valve, package restraing mesh.

This Bubble Leak Testing System (also known as the Bubble Emission Testing Equipment) is used to test the seal integrity sealed packages, such as medical packages. This procedure is performed by submersing the fully sealed specimen into a tank of water and pulling a vacuum in order to create a pressure difference between the inside of the pouch and the outside. If the package integrity is compromised, this pressure difference will begin to drive the air out of the package and bubbles will start to emit from the pouch. The location of bubble emission points to the leak.

A bubble leak testing system is by far the most economical and practical method for performing medical package testing and detecting pouch leaks. Your package integrity test can be performed in 30 seconds or less.

Sanatron Quality Testing Systems are much better than a Recall or an Unplanned Corrective Action

If you think that you do not have the time or the resources to implement a proper Quality Control Program, then you certainly will not have the time or the resources for unprompted Corrective Actions after Faulty or Leaking Products have reached your Customers.

Imagine having to explain to your team, your superiors, and your customers as to why there are so many quality defects. Imagine having to explain what you could have done to prevent it. Imagine dealing with field alerts, recalls, or having to contend with your auditors as to why you don’t have a Quality Control or Leak Testing Procedure in place.

Fortunately, our Vacuum Bubble Leak Testing Systems will allow you to produce Great Products and will help you to perform the following Test Protocols:

ASTM D3078 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
ASTM D4169 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D4991 Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
ASTM D5094 Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
ASTM D6653 Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
ASTM E515 Standard Practice for Leaks Using Bubble Emission Techniques
MIL-STD-810 MIL Standard Immersion Test 810G
MIL-STD-3010C MILITARY STANDARD: TEST PROCEDURES FOR PACKAGING MATERIALS.
FED-STD-101–Test Procedure for Packaging Materials: Method 3028, Method 5009
AIAA 2000-3735 Aerospace Leak Test Requirements Such as the Detecting Gross Leaks

Do things right the first time! Everyone will benefit! Get your Quality Leak Testing System. Contact Us now.

You may be interested in some of our other items

We treat our customers well by Over-Delivering on our Promises (reason why we are Highly Rated on Google My Business). Check out some of our other items we carry that you can combine/integrate with your systems or projects.

Altitude Package ASTM D6653 Leak Testing Systems
Altitude Package (ASTM D6653) Leak Testing Systems, or Testing Systems which test the effect of higher altitude on packages are vacuum systems that consist of a vacuum chamber, a vacuum controller, and a vacuum pump. The goal of these package testing systems is intended to test and investigate the effects of higher altitudes on the seal integrity, package quality, or container closure integrity.
Power Vacuum Feedthroughs
Power vacuum feedthroughs are hermetically sealed off the shelf components used to transfer electrical power from the outside of the vacuum chamber into the inside of the vacuum chamber without compromising the vacuum. One example application would be powering an electronic device inside the vacuum chamber
Our Work: Chamber for Vacuum Extrusion System
This is a custom acrylic vacuum chamber build for a high volume manufacturer of parts which are fabricated using vacuum extrusion techniques. The challenge was to build a vacuum chamber system which mated on two perpendicular surfaces; on the bottom and on the rear of the chamber. This was accomplished by incorporating a double gasket mechanism on the bottom and incorporating a clamping mechanism on the rear.
Related Articles: Vacuum Levels of Acrylic Vacuum Chambers
In this article we will discuss the vacuum levels of an acrylic vacuum chamber. This article also covers the leak rate or the leak tightness of the acrylic chamber. Additionally, we are going to recommend a rule of thumb used for vacuum pump selection based on the size of the vacuum chamber.

Additional Comments

1. Depiction: We go above and beyond to represent our products the best we can, but all images are for reference only. If you want the exact dimensions of a product, please refer to the product drawing. If the drawing is not present, please contact us.

2. Discount: If you are ordering more than one item you will qualify for a discount, contact us for more details. No discount will be given after you have ordered and then realized you can get a discount. We put in a lot of effort writing this and we don`t reward failure to read our descriptions. However, since we are nice guys, we will give you a discount on your next order.

3. Shipping: The shipping rates are for the lower 48 states only; additional shipping charges apply to Alaska, Hawaii, and international orders. Keep in mind that international order will also be subject to duty and other charges.

4. Products: Our products are built-to-order; therefore, your product can be customized, but you must let us know beforehand. The pricing, shipping terms, and lead time apply to orders of less than three (3) items. If you are ordering more than 3 items, you should contact us to discuss your quote.

5. Return Policy: 14 days on all standard products. We stand 100% behind our products. If there was a mistake on our part, you will be refunded 100% of your money including shipping. If the mistake was on your part or you decided that you didn`t want it after all, you will pay for shipping and we will fully refund rest of your money. Chamber must be insured during return shipping for the price that you paid for and in a non-damaged condition. Return Policy does NOT apply to custom items, jobs, or products. If you have asked us to modify any of our standard products, you will not be able to return your item.