Testing of Construction and Farming Equipment implementing Sanatron Equipment

Testing of Construction and Farming Equipment implementing Sanatron Equipment
Testing of Construction and Farming Equipment implementing Sanatron Equipment
Part integrity is critical when it comes to construction and farming equipment. This is one of the many reasons our customers chose us. When testing quality and accurate results are critical, our equipment will deliver. A Farming and Construction equipment manufacturer contacted us to help them develop, design, build, and assemble a testing chamber capable of testing various sized parts they were making.

What you see is a cylindrical chamber, 12 inch inside diameter and about 20 inch Height. The chamber comes with a venting valve, a dial vacuum gauge, a vacuum valve and a vacuum adjustment valve. The vacuum adjustment valve is used to set a specific vacuum level during test. For example, if a 5 inHg of vacuum is required, this vacuum adjustment valve sets the vacuum to 5inHg. There is a lock nut to lock in the setting. The next time the vacuum is pulled, the vacuum will go to 5inHg. This is useful when a test needs to be repeated. It removes the need for having the operator close the vacuum valve right at 5inHg which is sometimes not as easy to do. This chamber also has a package restraining mesh which will push the specimen down and keep it submersed under water in order from preventing it from floating up.

If you are looking for a Testing chamber capable of consistency in quality and performance. Make sure to contact us to see how we can be of help.

You may be interested in some of our other items

We are an Engineering Excellence Company. You should check out some of our other items we carry; click on the links below.

Force Decay Leak Testing Systems
Force Decay Leak Testing Systems are instruments that detect and quantify leaks in a test specimen through measuring the drop in force an inflated specimen applied onto a pressure transducer. The specimen is placed into a vacuum chamber, a vacuum is pulled, and the test sample inflates. As the test sample inflates, it applied a specific force onto the force transducer. This force is measured and recorded over time. If a leak exists, the specimen will deflate and lose pressure, as a result, the force it applies onto the force transducer will decrease. This in turn will enable for detection and quantification of a leak in the specimen.
Altitude Simulation Controller Instruments
An Altitude simulation Controller is type of vacuum controller that simulates a certain altitude because altitude can be derived from vacuum levels. An altitude simulation controller will enable you to hold your vacuum level at a certain altitude equivalent of testing, run an altitude vs time profile, or rate of change of altitude vs. time. Further options include a vacuum pump relay that will control when the vacuum pump turns on and a vacuum valve.
Our Work: Research, Development, and Testing of Weather Balloons inside a Clear Vacuum Chamber
A wonderful company (more like one of the best companies in the world) which is currently involved with the research, development, and testing of high-altitude weather balloons, had a need for a vacuum chamber capable of achieving about 100 micro Torr (Micron) of ultimate Pressure for their testing environment. Fortunately, acrylic vacuum chambers are the perfect choice when it comes to Low, Rough, and Medium Vacuum.
Related Articles: Visual Inspection Quality Testing of Heat Sealed Packages
Visual inspection is an attractive option because it does not require the purchase of any additional equipment. There are several arguments against Visual Inspection of heat seals; the argument against visual inspection is that visual inspection is subjective, unreliable, operator dependent, or not a valid method of inspection. However, if you have the correct training, procedures, and documentation in place, visual inspection can become a powerful tool in your quest for better packaging.